• <table id="ssqyq"><td id="ssqyq"></td></table>
  • 0.1mg~600t 測力傳感器/稱重傳感器/扭矩傳感器/氣.液壓力傳感器/高精度配料控制器/毫克級傳感器/方案解決
    測力設備 ZHCM02

    測力設備 ZHCM02

    ? 測力設備

    ? 針對疊加式力標準機對力值誤差(進、回程)、方位誤差的特殊要求,進行了結構的特殊設計。

    ? 上置式柱塞油缸,上置式傳感器。反力架的自重落在傳感器上。保證了標 準機的受力軸線同軸于重力軸線。
    ? 無間隙反力架?;钊低瓿衫瓑嚎臻g的調整,無受力基準的變更。
    ? 正方形反力架。底座、橫梁采用整體正方形結構,消除了0°與180°方向和 90°與270°方向的受力變形的不一致。

    ? 采用單個傳感器測力方式。德國HBM高精度(00級C18,優于0.01%) 負荷傳感器進行測量。

    ? Force measuring equipment

    ? In view of the special requirements of the superimposed force standard machine for force value error (advance and return) and azimuth error, the special design of the structure is carried out.

    ? Upper plunger cylinder, upper sensor. The dead weight of the reaction frame falls on the sensor. It ensures that the stress axis of the standard machine is coaxial with the gravity axis.

    ? Clearance free reaction frame. The lifting and lowering of the piston completes the adjustment of the tension and compression space, and there is no change in the stress reference.

    ? Square reaction frame. The overall square structure is adopted for the base and beam, which eliminates the inconsistency between the stress deformation in the direction of 0 ° and 180 ° and the direction of 90 ° and 270 °.
    ? Use a single sensor to measure the force. German HBM high-precision (Class 00 C18, better than 0.01%) load sensor for measurement.


    測力設備 ZHCM02
  • <table id="ssqyq"><td id="ssqyq"></td></table>